Textured Stone Pattern wallpaper stones
Reference: P6805The image presents a textured stone pattern with a geometric design, featuring a 3D effect that gives depth to the surface. The cubism-inspired squares create a dynamic visual interest for interior design enhancements.
The Textured Stone Pattern wallpaper stones is a visually striking design that combines the natural elegance of stone with a modern, geometric pattern. The stone-effect texture creates a 3D effect that adds depth and dimension to any space, making it perfect for interior design with a touch of cubism. This unique wallpaper is a bold statement piece that will elevate any room!
Why this product should be used for decoration
The Textured Stone Pattern stone effect wallpaper is the perfect choice for decorating any space. Its unique design adds a touch of sophistication and style, creating a stunning focal point in any room. The 3D effect and geometric pattern make it a standout choice for interior design enthusiasts looking to make a statement!
How to apply this product
Applying the Textured Stone Pattern stone effect wallpaper is easy and hassle-free. Simply follow the instructions provided with the product to achieve a flawless finish. Whether you're a seasoned DIY enthusiast or a beginner, this wallpaper is designed for easy application, making it the perfect choice for any home!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.