Stone effect wallpaper textured grey surface
Reference: P12046Transform your space with our Stone effect wallpaper textured grey surface, an exquisite design that captures the essence of natural stone. With its matt finish, non-woven material, and a beautifully textured grey surface, this wallpaper not only enhances the aesthetic appeal of your walls but also ensures durability for years to come. Enjoy its easy maintenance, as it can be effortlessly cleaned with a damp cloth and a little neutral soap, making it a practical choice for any room!
Why this product should be used for decoration
The Stone effect wallpaper textured grey surface stone effect wallpaper is perfect for those looking to elevate their home decor. This stunning design brings a touch of elegance and sophistication to any environment, whether it’s your living room, bedroom, or office. Imagine transforming flat walls into captivating focal points that exude style and comfort! The natural stone look adds depth and character, making your space feel warm and inviting.
How to apply this product
Applying the Stone effect wallpaper textured grey surface stone effect wallpaper is a simple and enjoyable process! All you need is glue, a roller, a brush, and a cutter. Just apply the adhesive to the wall or the product, and then carefully place the wallpaper in position. With easy handling and removal, you can refresh your decor anytime!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.