Vertical timber wood effect wallpaper
Reference: P10463Featuring an elegant design of natural wood stripes, this composition highlights the beauty of vertical wooden textures. Each stripe adds depth and warmth, creating a cozy ambiance that complements various decor styles.
Transform your space with our Vertical timber wood effect wallpaper, designed to evoke the beauty of natural wood. Featuring a stunning wood-effect texture, this wallpaper mimics the appearance of vertical planks, bringing a warm and inviting atmosphere to any room. The realistic wood grains and rich tones create a serene backdrop that complements various decor styles, making it a perfect choice for your home!
Why this product should be used for decoration
The Vertical timber wood effect wallpaper is more than just a decor choice; it's an opportunity to enhance your environment! Imagine the charm of wood, effortlessly elevating your interiors while providing a cozy feel. This wallpaper invites warmth and elegance into your living spaces, making it ideal for both modern and traditional settings. Embrace the natural aesthetic and let your walls tell a story!
How to apply this product
Applying the Vertical timber wood effect wallpaper is a breeze! Simply use glue to adhere the non-woven material to your wall, employing a roller, brush, and cutter for precision. Enjoy a seamless finish that enhances your space effortlessly.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.