Grey shades tile effect wallpaper
Reference: P7850The grey shades tile effect wallpaper is a stunning addition to any home! The design features a beautiful combination of gray tones and tile patterns, creating a modern and sophisticated look. The non-woven material gives a luxurious matte finish, adding a touch of elegance to any room. The wallpaper is easy to clean with a damp cloth and a little neutral soap, making it perfect for high-traffic areas. With a durability of 10-15 years, this wallpaper is a long-lasting and cost-effective choice for decoration.
Why this product should be used for decoration
Elevate your space with the timeless beauty of the Grey shades tile effect wallpaper! The stunning tile pattern and subtle shades of gray create a sophisticated and modern atmosphere. Whether you're looking to add a touch of elegance to your living room or create a stylish backdrop in your bedroom, this wallpaper is the perfect choice for adding a touch of luxury to your home.
How to apply this product
Applying the Grey shades tile effect wallpaper is a breeze! Simply use glue on the wall or on the product, then use a roller, brush, and cutter to achieve a flawless finish. The 50-centimetre-wide rolls make application quick and easy, allowing you to transform your space in no time!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.