1
of
4
elegant palm leaves living room wall mural
Reference: F6896
From
S$36.20
Information elegant palm leaves living room wall mural
Why this product should be used for decoration?
Transform your living room into an elegant oasis with our stunning palm leaves living room wall mural! This captivating design features a beautiful combination of palm leaves, watercolor, and gold accents, creating a visually striking and sophisticated look. The mural's matt colors enhance its overall appeal, adding a touch of modernity to any space. With its non-woven wallpaper material, applying this mural is a breeze. Simply use glue and tools like a roller, brush, and cutter for a seamless installation. Cleaning is effortless too, requiring just a damp cloth and a little neutral soap. With a grammage of 180 grams per square meter and a durability of 10-15 years, this mural is built to last. And when it's time for a change, wetting the product with a sprayer easily allows for removal. With its M2 reaction to fire certification, you can enjoy peace of mind while adding a touch of nature to your living room!How to apply this product?
Applying our elegant palm leaves wall mural in your living room is a simple process that will completely transform your space. Start by preparing the wall and ensuring it is clean and smooth. Then, using glue, apply the non-woven wallpaper to the wall, carefully aligning the panels for a seamless look. Utilize a roller to smooth out any air bubbles, followed by a brush and cutter to trim any excess material. The result is a stunning wall mural that effortlessly brings nature indoors. With its captivating palm leaves design, this mural is perfect for adding a touch of elegance to your living room!Buy now at a discount!
Installation tools
Material: Non-woven wallpaper (TNT)
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
You will receive your photo mural carefully rolled in 50 cm rolls and secured with tape to keep it compact.
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Hanging wallpaper or photo murals requires proper preparation and following the steps.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Standard 10 days home delivery.
Express delivery within 72 hours to your home address available.
Express delivery within 72 hours to your home address available.
These shipping conditions are indicative and non-binding. The final delivery times and costs will be shown when selecting the final delivery address and transport agency.